How large is the top spray shower

Regardless of spring, summer, autumn, winter, bathing is always essential, and bathroom showers are a must-have item for us. Just do a search online, there are many types and brands of showers, so consumers do n’t know which one is better. Big top spray shower, because of the abundant water, has a good fatigue relief effect for consumers who have worked hard for a day, and is favored by consumers. But for consumers, how much is the right size to buy.

How big is the shower head spray?

Check online for more top head shower sold online. There are 6 inches, 8 inches, and 10 inches in diameter. Generally speaking, the larger top spray showers will produce a little more water, but because of the current bathroom Shower manufacturers have a water-saving process, which is not very expensive for general bathing.


More bidet spray use Air-in air injection technology. Water droplets are rich in air, and the water is full and uniform. The water droplets are more gentle and delicate on the skin. Because of the injection of air, the water from the outlet holes is smaller and the water is effectively saved. In general, ordinary showers can save more than 40% of water.

In addition, the surface finish of the shower head is also very important when buying a top spray shower. Nowadays, various large shower heads on the market are between 6 inches and 10 inches in size. You can learn more about different details of the design. Have a better shower experience.

Water leakage in the bathroom faucet

1. The faucet is still out of water after the spool is closed. This phenomenon may be caused by the looseness of the pressure cap causing the looseness of the valve core to seal the water. The solution is to remove the handle and the decorative cover, and re-tighten the pressure cap. There is also a possibility that the rubber ring at the bottom of the valve core is deformed. The water cannot be sealed. The solution is to take out the valve plug, check the bottom rubber ring, reset it and reinstall it.

2. Water seeps from around the spool. This phenomenon may be caused by loose or displaced spool. The solution is to remove the spool and reinstall it.

3. Water seeps from the middle of the spool. This phenomenon is the damage of the valve core. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which increases the maintenance cost.

4. The bottom of the faucet leaks. This phenomenon is generally caused by the unfilled or deformed O-ring of the inlet pipe. The solution is to unscrew the hose. If the O-ring is not deformed, the O-ring and the inlet pipe are re-assembled. Yes, if the O-ring is found to be deformed, replace the O-ring.

source:https://www.chinashattaf.com/